Portable Electric Rebar Bender

Description

The LHRB-16A is portable electric Rebar bender helps save man-hours by bending rebar up to 32mm grade 60 from 0-135 degrees in-place at the job site

The 1-90 degree bending capacity takes less than four seconds , This tool draws less than 9 Amps and can easily be used with a standard 120V extension cord.

It is the perfect tool for bending tails in block wall Construction! Widely used for bending and straightening in railway, Bridges,steel reinforcement cage ,basement,building caps,cast-in-place

Specification:

Model: LHRB-16A

Voltage:220V/110V

Power:1100W-1600W

Bending speed:2-6s

Bending Range:4-32mm

Net weight:13.8-23KG

Dimensions (w/ side handle) L x W x H: :630*150*155mm

Packing Size L x W x H:670*150*155mm

Operating rebar bender

1. Insert rebar(s) in between the pivot shoe and housing so that the rebar is at right angles to the pivot shoe/housing.

2. Throttle the on/off switch until the rebar has reached your required angle.

3. After the bend, release the on/off switch and turn the valve lever to the open position to return the piston to the starting position. The piston will not return automatically when the on/off switch is released.

Package

Should you be interested in any of our products, please contact us directly. Thanks!

Email:

Mobile phone/Whatsapp:0086-18802956872

http://www.langvicmachinery.com/